Effect of sweeteners and carbonation on aroma partitioning and release in beverage systems.

The effect of monosaccharides (glucose, fructose and galactose) and disaccharides (sucrose and lactose) at 10, 20 and 30 % w/v on the in-vitro aroma partitioning of C4 - C10 aldehydes and ethyl esters, as well as limonene (concentration of aroma compounds at 1 µg mL-1), was studied using atmospheric pressure chemical ionisation-mass spectrometry. An increase in sugar concentration from 0 to 30 % w/v resulted in a significant increase in partitioning under static headspace conditions for the majority of the compounds (p < 0.05), an effect generally not observed when 10 % w/v sucrose was substituted with low-calorie sweeteners (p > 0.05). The complexity of the system was increased to model a soft drink design - comprising water, sucrose (10, 20 and 30 % w/v), acid (0.15 % w/v), carbonation (∼7.2 g/L CO2) and aroma compounds representative of an apple style flavouring, namely ethyl butanoate and hexanal (10 µg mL-1 each). Although the addition of sucrose had no significant in-vivo effect, carbonation significantly decreased breath-by-breath (in-vivo) aroma delivery (p < 0.05). To understand the physical mechanisms behind aroma release from the beverage matrix, the effect of sucrose on the kinetics of the matrix components was explored. An increase in sucrose concentration from 0 to 30 % w/v resulted in a significant decrease in water activity (p < 0.05), which accounted for the significantly slower rate of self-diffusion of aroma compounds (p < 0.05), measured using diffusion-ordered spectroscopy-nuclear magnetic resonance spectroscopy. No significant effect of sucrose on carbon dioxide volume flux was found (p > 0.05).

Sensory perception and consumer acceptance of commercial and salt-reduced potato crisps formulated using salt reduction design rules.

Successful salt (NaCl) reduction strategies are required to reduce the salt content of snacks while maintaining saltiness perception and consumer acceptance. Previous research suggests that particle physicochemical design rules (small particle size, low density, low hydrophobicity, optimised particle shape) can be leveraged to produce salt particles that enhance saltiness perception. This study aimed to validate these design rules by applying optimised model salts to unsalted potato crisps at a 30% reduced salt content to produce prototype products. A selection of commercial products were also chosen to represent the salt content and crisp style of the broader market, with the aim to investigate the potential of other salt reduction strategies including; direct salt removal without compensation for loss of salt content and increasing time in mouth, while exploring the impact of consumer mouth behaviour type on consumer product preference. Nine products varying in salt content (6 standard, 1 crinkle-cut, 1 thick-cut batch-fried, 1 baked reconstituted potato) were subject to descriptive sensory analysis with a trained panel (n = 11). A subset (seven products) were assessed for consumer acceptance (n = 93). A salt reduction of 30% was achieved while maintaining saltiness perception and consumer acceptance using model salts, while direct removal of salt without perceptual impact was only achievable by 15%. To investigate key drivers of liking, consumers were segmented based on product liking and mouth behaviour. Results suggested that whilst salt content was the primary driver, specific texture profiles were polarising. However, mouth behaviour had minimal influence on preference. These results validate previously described physicochemical design rules for developing novel salt particles for salt reduction and inform ingredient design for the food and flavour industries.

Mechanisms of umami taste perception: From molecular level to brain imaging.

Due to unique characteristics, umami substances have gained much attention in the food industry during the past decade as potential replacers to sodium or fat to increase food palatability. Umami is not only known to increase appetite, but also to increase satiety, and hence could be used to control food intake. Therefore, it is important to understand the mechanism(s) involved in umami taste perception. This review discusses current knowledge of the mechanism(s) of umami perception from receptor level to human brain imaging. New findings regarding the molecular mechanisms for detecting umami tastes and their pathway(s), and the peripheral and central coding to umami taste are reviewed. The representation of umami in the human brain and the individual variation in detecting umami taste and associations with genotype are discussed. The presence of umami taste receptors in the gastrointestinal tract, and the interactions between the brain and gut are highlighted. The review concludes that more research is required into umami taste perception to include not only oral umami taste perception, but also the wider "whole body" signaling mechanisms, to explore the interaction between the brain and gut in response to umami perception and ingestion.

Physicochemical design rules for the formulation of novel salt particles with optimised saltiness.

Novel sodium reduction strategies are urgently required by the food industry. We hypothesised that redesigning salt crystals (size, density, hydrophobicity and flow properties) will offer a new route to increase saltiness and therefore reduce sodium. Eight salts were compared with different physicochemical properties, the resultant particles were characterised and adhesion to product, loss in-pack, rate of dissolution and ultimately saltiness perception were evaluated. Principle findings included that particle adhesion was driven by particle size (r = -0.85, p = 0.008), bulk density (r = -0.80, p = 0.017) and flow properties (r = 0.77, p = 0.015); loss in-pack was associated with particle size and hydrophobicity of the salt particle while dissolution and/or saltiness perception was also driven by particle size and hydrophobicity of the salt particle. The findings offer a new set of design rules for future ingredient design for the food and flavour industries.

The progression of lipid oxidation, ß-carotenes degradation and sensory perception of batch-fried sliced sweet potato crisps during storage.

Dee are a unique and rapidly growing part of the global snack food market and are recognised as having distinct sensory properties (taste and texture). In this study, the development of important volatile aroma compounds over storage was evaluated and their chemical origin explained. Sweet potatoes were batch fried in high oleic sunflower oil (HOSO) and subjected to accelerated shelf life testing. Headspace volatiles were analysed using SPME GC-MS and correlated with sensory perception. All the components (sweet potatoes, oil and ß-carotene) showed significant degradation after 3 weeks of storage at accelerated conditions (equivalent to 12 weeks in real-time at 25 °C). Marker volatiles associated with lipid oxidation such as hexanal, octanal, pentanal were identified, in addition to norisoprenoids from ß-carotene degradation such as ß-ionon, 5,6-epoxy-ß-ionone, dihydroactinidiolide (DHA) and ß-cyclocitral. The most prominent marker of lipid oxidation (hexanal) rapidly increased at week 1, whereas the carotene degradation makers did not rapidly increase until week 3 suggesting a delayed response. The frying temperature during the batch frying process of SPC was also shown to play a significant role in the sensory perception of the product over the shelf life. Overall, the results suggest that tight control of process variables and raw material design may enable extended shelf life and potentially enhanced health credentials for the product. These findings are unique to SPC, but also of value to the wider food industry.

A comparison of the sensory and rheological properties of different cellulosic fibres for food.

The impact of different cellulosic microstructures formed by highly entangled fibre networks was studied for food applications as dietary fibre. This paper reports the impact of the microstructure on the rheological and sensory behaviour of the aqueous suspensions of particulate and fibrillated forms of softwood cellulosic fibres, and was compared with citrus fibres. An aqueous suspension of cellulosic fibres shows stable viscoelastic gel-like behaviour as a function of frequency. The particulate form of cellulosic fibres showed the lowest shear viscosity as compared with the entangled network system at comparable concentrations. To provide further insight into the relationship between the structure of cellulosic fibre and taste (salt) perception, an aqueous suspension with matched shear viscosities were studied. A hypothesis to explain why softwood cellulosic fibre (CTE) with an entangled network structure prolongs the taste perception is presented.

Optimisation of octinyl succinic anhydride starch stablised w1/o/w2 emulsions for oral destablisation of encapsulated salt and enhanced saltiness.

Sodium (salt) was encapsulated within the inner water phase of w1/o/w2 food emulsions externally stabilised by starch particles with the ultimate aim of enhancing saltiness perception. The physical properties of the starch particles were modified by octenyl succinic anhydride (OSA) treatment (0-3%) to vary the degree of hydrophobicity of the emulsifying starch. During oral processing native salivary amylase hydrolysed the starch and destabilised the o/w emulsion releasing the inner w/o phase and subsequently sodium into the oral cavity, resulting in a salty taste. Whilst increasing OSA treatment levels increased the stability of the emulsion, intermediate or low levels of starch modification resulted in enhanced saltiness. It is therefore proposed that 1.5% OSA modified starch is optimal for sodium delivery and 2% OSA modified starch is optimal for sodium delivery in systems that require greater process stability. It is also shown that sodium release was further enhanced by oral processing and was positively correlated with native amylase activity. The results demonstrate a promising new approach for the reduction of salt or sugar in emulsion based foods.

Consumer-orientated development of hybrid beef burger and sausage analogues.

Hybrid meat analogues, whereby a proportion of meat has been partially replaced by more sustainable protein sources, have been proposed to provide a means for more sustainable diets in the future. Consumer testing was conducted to determine consumer acceptability of different formulations of Hybrid beef burgers and pork sausages in comparison with both meat and meat-free commercial products. Acceptability data were generated using the 9-point hedonic scale. Check-all-that-apply (CATA) questioning was used to determine the sensory attributes perceived in each product as well as information on the attributes of consumers' ideal products. It was identified that Hybrid products were generally well liked among consumers and no significant differences in consumer acceptability (p > .05) were identified between Hybrid and full meat products, whereas meat-free products were found to be less accepted. However, Hybrid sausages received higher acceptability scores (6.00-6.51) than Hybrid burgers (5.84-5.92) suggesting that format may have a large impact on consumer acceptability of Hybrid products. Correspondence Analysis (CA) indicated that Hybrid products were grouped with meat products in their sensory attributes. Penalty analysis found that a "meaty flavor" was the largest factor driving consumer acceptability in both burgers and sausages. Cluster analysis of consumer acceptability data identified key differences in overall acceptability between different consumer groups (consumers who only eat meat products and consumers who eat both meat and meat-free products). The Hybrid concept was found to bridge the acceptability gap between meat and meat-free products; however, further product reformulation is required to optimize consumer acceptability.

Effects of aroma and taste, independently or in combination, on appetite sensation and subsequent food intake.

Food flavour is important in appetite control. The effects of aroma and taste, independently or in combination, on appetite sensation and subsequent food intake, were studied. Twenty-six females (24 ± 4 years, 20.9 ± 1.9 kg⋅m-2) consumed, over 15 min period, one of four sample drinks as a preload, followed by an ad libitum consumption of a pasta meal (after 65 min). Sample drinks were: water (S1, 0 kcal), water with strawberry aroma (S2, 0 kcal), water with sucrose and citric acid (S3, 48 kcal) and water with strawberry aroma, sucrose and citric acid (S4, 48 kcal). Appetite sensation did not differ between the S1 (water), S2 (aroma) and S3 (taste) conditions. Compared with S1 (water), S2 (aroma) and S3 (taste), S4 (aroma + taste) suppressed hunger sensation over the 15 min sample drink consumption period (satiation) (p < 0.05). S4 (aroma + taste) further reduced hunger sensation (satiety) more than S1 at 5, 20 and 30 min after the drink was consumed (p < 0.05), more than S2 (aroma) at 5 and 20 min after the drink was consumed (p < 0.05), and more than S3 (taste) at 5 min after the drink was consumed (p < 0.05). Subsequent pasta energy intake did not vary between the sample drink conditions. S4 (aroma + taste) had the strongest perceived flavour. This study suggests that the combination of aroma and taste induced greater satiation and short-term satiety than the independent aroma or taste and water, potentially via increasing the perceived flavour intensity or by enhancing the perceived flavour quality and complexity as a result of aroma-taste cross-modal perception.

Programmed emulsions for sodium reduction in emulsion based foods.

In this research a microstructure approach to reduce sodium levels in emulsion based foods is presented. If successful, this strategy will enable reduction of sodium without affecting consumer satisfaction with regard to salty taste. The microstructure approach comprised of entrapment of sodium in the internal aqueous phase of water-in-oil-in-water emulsions. These were designed to destabilise during oral processing when in contact with the salivary enzyme amylase in combination with the mechanical manipulation of the emulsion between the tongue and palate. Oral destabilisation was achieved through breakdown of the emulsion that was stabilised with a commercially modified octenyl succinic anhydride (OSA)-starch. Microstructure breakdown and salt release was evaluated utilising in vitro, in vivo and sensory methods. For control emulsions, stabilised with orally inert proteins, no loss of structure and no release of sodium from the internal aqueous phase was found. The OSA-starch microstructure breakdown took the initial form of oil droplet coalescence. It is hypothesised that during this coalescence process sodium from the internalised aqueous phase is partially released and is therefore available for perception. Indeed, programmed emulsions showed an enhancement in saltiness perception; a 23.7% reduction in sodium could be achieved without compromise in salty taste (p < 0.05; 120 consumers). This study shows a promising new approach for sodium reduction in liquid and semi-liquid emulsion based foods.

Study of the influence of yeast inoculum concentration (Yarrowia lipolytica and Kluyveromyces lactis) on blue cheese aroma development using microbiological models.

Yarrowia lipolytica and Kluyveromyces lactis occur as part of Stilton cheese microflora yet are not controlled during production. This study investigated the influence of their inoculum concentration on aroma production. Models of Y. lipolytica and K. lactis, with Penicillium roqueforti, were analysed using instrumental and sensory analysis. Different concentrations of Y. lipolytica produced important changes in the aroma profiles of microbiological models, analysed by solid-phase microextraction (SPME GC-MS). Sensory analysis with discrimination tests showed differences were detectable via human perception but did not concern the similarity to blue cheese odour. Increasing the inoculum concentration of K. lactis resulted in decreased variation between replicates. Partial least squares (PLS) regression on Flash profile data showed models inoculated with low concentrations of K. lactis exhibited blue cheese-related attributes, associated with increased ketone production. Results suggest that controlling the amount of Y. lipolytica and K. lactis during production offers potential to manipulate blue cheese aroma development.

Effect of fat content on flavor delivery during consumption: an in vivo model.

Data from studies of the effect of fat on in vivo flavor release were modeled to generate a predictive model (R(2) = 0.71). The data included a range of values from the literature and 200 new data points giving a total data set of 345 values; of these, 310 values were used as a data set for model development, and the remaining 35 values were used as a test set for model validation. The model could be used to estimate the differences in flavor delivery for samples with two different fat contents. The hydrophobicity of the flavor compounds was represented in the model by including log P. The model may provide a tool to aid in flavor reformulation between samples with different fat contents. Sensory analysis showed that an orange flavor present in a high-fat food could be reformulated for a low-fat food, giving a more similar flavor experience than in the absence of any formulation changes.

Novel aspects of accumulation dynamics and A beta composition in transgenic models of AD.

A homogeneous time-resolved fluorescence immunoassay for detection of beta-amyloid (A beta) peptides has been adapted for quantification of A beta(40) and A beta(42) accumulation in brains of APP695SWE transgenic mice. These over-express human beta APP(swe), beta-amyloid precursor protein (beta-APP) containing the K670N/M671L 'Swedish' familial Alzheimer's disease (FAD) mutation. Both peptides start to accumulate in this line from about 260 to 280 days of age. Co-expression of a human presenilin-1 (PS1) transgene containing the A246E FAD mutation accelerates deposition and also favors-at least initially-accumulation of A beta(42) so that the A beta(2):A beta(40) ratio of peptides from 7- to 12-month-old APP695SWE x PS1A246E animals is significantly elevated above that observed throughout the lifetime of APP695SWE mice. These findings, supported by parallel immunohistochemical staining and surface-enhanced laser desorption/ionization time-of-flight (SELDI-TOF) mass spectrometry data, offer important longitudinal characterization of two mouse models of cerebral amyloidosis. Application of the same extraction and quantitation procedures to samples of temporal cortex from AD sufferers indicates however that A beta(40) is only a minor component of beta-amyloid in humans.

Substance P (neurokinin 1) receptor antagonists enhance dorsal raphe neuronal activity.

Substance P receptor [neurokinin 1 (NK1] antagonists (SPAs) represent a novel mechanistic approach to antidepressant therapy with comparable clinical efficacy to selective serotonin reuptake inhibitors (SSRIs). Because SSRIs are thought to exert their therapeutic effects by enhancing central serotonergic function, we have examined whether SPAs regulate neuronal activity in the dorsal raphe nucleus (DRN), the main source of serotonergic projections to the forebrain. Using in vivo electrophysiological techniques in the guinea pig, we found that administration of the highly selective NK1 receptor antagonist 1-(5-[[(2R,3S)-2-([(1R)-1-[3,5-bis(trifluoromethyl)phenyl]ethyl]oxy)-3-(4-phenyl)morpholin-4-yl]methyl]-2H-1,2,3-triazol-4-yl)-N,N-dimethylmethanamine (L-760735) caused an increase in DRN neuronal firing rate. However, unlike chronic treatment with fluoxetine, there was no detectable 5-HT1A autoreceptor desensitization. In vitro electrophysiological investigation showed that these effects were not mediated by a direct action in the DRN, an observation supported by immunocytochemical analysis that identified the lateral habenula (LHb) as a more likely site of action. Subsequently, we found that local application of L-760735 into the LHb increased firing in the DRN, which, together with our data showing that L-760735 increased metabolic activity in the cingulate cortex, amygdala, LHb, and DRN, indicates that the effects of L-760735 may be mediated by disinhibition of forebrain structures acting via a habenulo raphe projection. These findings support other evidence for an antidepressant profile of SPAs and suggest that regulation of DRN neuronal activity may contribute to their antidepressant mechanism of action but in a manner that is distinct from monoamine reuptake inhibitors.